Removing terminal cable and port covers

Follow

This brief video shows how to get the 2 covers off the back of the touch dynamic terminal to be able to access the various connections and ports on the device.

Link to send to clients: https://vimeo.com/380486876/047c858c98

Transcript (To aid in searching/indexing):

1

00:00:00,000 --> 00:00:03,000

In order to plug in new devices or access the connections

 

2

00:00:03,000 --> 00:00:06,666

on the terminal, there are 2 cable covers to remove.

 

3

00:00:06,666 --> 00:00:10,132

First loosen the back screw on the terminal.

 

4

00:00:10,133 --> 00:00:13,999

Then tip up the device and run your fingers under the terminal.

 

5

00:00:15,400 --> 00:00:18,133

Press forward to pop the cover out

 

6

00:00:22,466 --> 00:00:24,666

and remove the cover

 

7

00:00:31,366 --> 00:00:35,732

When you are done, just hand tighen the back screw once you replace that panel,

 

8

00:00:35,733 --> 00:00:37,566

don’t use a screwdriver.

 

 

Was this article helpful?
0 out of 0 found this helpful

Comments